Planning
| Time |
Event |
(+)
|
|
19:00 - 20:30
|
Welcome reception (SALON PASTEUR) |
|
| Time |
Event |
(+)
|
|
08:30 - 09:00
|
Opening session (AUDITORIUM PASTEUR) |
|
|
09:00 - 10:00
|
Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons … (AUDITORIUM PASTEUR) - Svend Tarald Kibsgaard (Previous Leading Researcher in Magnetic Bearing Supported Machines for Equinor) ; Chair: Bert-Uwe Koehler (HTW Berlin); Co-Chair: Yuanping Xu (NUAA) |
|
|
10:00 - 10:20
|
Break - Break |
|
|
10:20 - 12:20
|
1-1 (RHÔNE 1) - Adam Pilat (AGH University of Science and Technology). Co-Chair: Dave Winterborne, Newcastle University |
(+)
|
|
10:20 - 10:50 |
› Experience with Industrial AMB Development in Zittau Description - Test Rigs – Prototypes – Possibilities - Christian Vanek, Hochschule Zittau/Goerlitz |
|
|
10:50 - 11:20 |
› Magnetic Suspension Stability of a Compact Axial Flux Self-Bearing Motor for Implantable Pediatric Rotary Blood Pumps - Osa Masahiro, Ibaraki University |
|
|
11:20 - 11:50 |
› Generalized Modal Decoupling Control for Active Magnetic Bearings - Pascal Zeugin, Mecos AG |
|
|
11:50 - 12:20 |
› Rotordynamic Design and Control of Three-Stage Centrifugal Compressor with Magnetic Bearings - Sena Jeong, Air Solution R&D Center, LG Electronics |
|
|
10:20 - 12:20
|
1-2 (RHÔNE 2) - Richard Jayawant (Product manager for Waukesha Magnetic Bearings). Co-Chair:Benedikt Schübler, TU Darmstadt - IMS |
(+)
|
|
10:20 - 10:50 |
› 2nd Review of Developments in Bearingless Motors - Hubert Mitterhofer, Linz Center of Mechatronics GmbH [Autriche] |
|
|
10:50 - 11:20 |
› Analysis of Force Capacity in Magnetic Bearings and Bearingless Motors from the Perspective of Airgap Space Harmonic Fields - Anvar Khamitov, University of Wisconsin-Madison |
|
|
11:20 - 11:50 |
› Applicability of flux switching permanent magnet bearingless motors in present-day and future manufacturing and transportation - Rafal Jastrzebski, Lappeenranta-Lahti University of Technology LUT |
|
|
11:50 - 12:20 |
› Bearingless Slice Motors with PM-free Rotor for Disposable Centrifugal Blood Pumps - Tadahiko SHINSHI, Tokyo Institute of Technology |
|
|
10:20 - 12:20
|
1-3 (RHÔNE 3) - Patrick Keogh, Bath University. Co-Chair Laurens Jacobs, KU Leuven |
(+)
|
|
10:20 - 10:50 |
› Comparing Magnetic Bearings with Symmetry of 3 - Afonso Gomes, Programa de Engenharia Elétrica, COPPE Universidade Federal do Rio de Janeiro |
|
|
10:50 - 12:20 |
› Linear Superconducting Magnetic Bearing for Urban Transportation - Richard Stephan, Federal University of Rio de Janeiro |
|
|
10:50 - 11:20 |
› The dynamic characteristics of a diamagnetic levitated electrostatic motor - Yuanping XU, Nanjing University of Aeronautics and Astronautics |
|
|
11:20 - 11:50 |
› Offshore gas compression challenges to reduce the carbon footprint in a needed transition. - Massimiliano Ortiz Neri, Baker Hughes Nuovo Pignone, - Alexandre Kral, SKF S2M |
|
|
12:20 - 14:00
|
Lunch (SALON PASTEUR) |
|
|
14:00 - 15:00
|
Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux (AUDITORIUM PASTEUR) - Yusheng HU (Gree Electric Appliances, lnc. of Zhuhai) |
|
|
15:00 - 16:30
|
1-4 (RHÔNE 1) - Myounggyu D. Noh, Chungnam National University. Co_Chair: Adrien Robert, Uclouvain |
(+)
|
|
15:00 - 15:30 |
› Observer-based Self-Sensing Techniques for Hybrid Active-Passive Self-Bearing Machines - Joachim Van Verdeghem, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain |
|
|
15:30 - 16:00 |
› Short-Circuit Fault-Tolerant Strategy for AMB Power Electronic Controller Based on Shared-Bridge Topology - Feng Hu, Huazhong University of Science and Technology |
|
|
16:00 - 16:30 |
› Ten-Phase-Nine-Leg Topology for Five-Axis Active Magnetic Bearing Drive - Yixuan Shuai, Yixuan Shuai |
|
|
15:00 - 16:30
|
1-5 (RHÔNE 2) - Mitterhofer Hubert, Linz Center of Mechatronics. Co-Chair: Guillaume Colinet, UCLouvain |
(+)
|
|
15:00 - 15:30 |
› A Comparison of GaN Transistors to MOSFETs for Active Magnetic Levitation - Alexander Pesch, Youngstown State University |
|
|
15:30 - 16:00 |
› Comparative analysis of the Performances and reliability of a Switching Power Amplifier (SPA) for Active Magnetic Bearing Systems: SiC MOSFET Vs Si IGBT Version - André De Andrade, SKF Magnetic Mechatronics |
|
|
16:00 - 16:30 |
› Axial Position Control of a Lorentz-Force-Type Cylindrical Self-Bering Motor with Coreless Distributed Windings - Satoshi Ueno, Ritsumeikan University |
|
|
15:00 - 16:30
|
1-6 (RHÔNE 3) - Wolfgang Gruber, Johannes Kepler University Linz. Co-Chair: Tramacere Eugenio,Politecnico di Torino |
(+)
|
|
15:00 - 15:30 |
› Modeling and Simulation of a Compressor Installed with Active Magnetic Bearings Exploiting Feedforward Control - Marius Pakštys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino |
|
|
15:30 - 16:00 |
› Variable Speed Direct Drive Induction Motors Levitated by Active Magnetic Bearings for Oil&Gas Compression Services - Lionel Durantay, General Electric |
|
|
16:00 - 16:30 |
› Investigation of magnetic field by the Hall sensors embedded into magnetic bearing poles - ADAM PILAT, AGH University of Science and Technology |
|
|
16:30 - 17:00
|
Break - Break |
|
|
17:00 - 18:30
|
1-7 (RHÔNE 1) - Beat Aeschlimann, ZHAW-IMS. Co-Chair Gauthier Fieux, Bath University |
(+)
|
|
17:00 - 17:30 |
› Design of a PCB integrated eddy current sensor with shield feature for radial rotor displacement measurement - Dominik Wimmer, TU Wien, Institute of Energy Systems and Electrical Drives |
|
|
17:30 - 18:00 |
› PWM Filter for Active Magnetic Bearings - Larry Hawkins, Calnetix Technologies |
|
|
18:00 - 18:30 |
› Limitations of Reluctance Networks to Model the Frequency-Dependent Leakage and Fringing Fluxes in Active Magnetic Thrust Bearings - Robert Seifert, VEM Sachsenwerk GmbH |
|
|
17:00 - 18:30
|
1-8 (RHÔNE 2) - Andrea Tonoli, Politecnico di Torino. Co-Chair: Anvar Khamitov, University of Wisconsin-Madison |
(+)
|
|
17:00 - 17:30 |
› Practical results of ADRC applied to Radial Position Control of a Bearingless Induction Machine - Jossana Ferreira, Universidade Federal do Rio Grande do Norte [Natal] |
|
|
17:30 - 18:00 |
› Tuning Methods for Classical SISO PID Magnetic Levitation Controllers via Analytic Models - Nathan Petersen, University of Wisconsin-Madison |
|
|
18:00 - 18:30 |
› Linear parameter-varying H∞ control of bearingless machine - Andrei Zhuravlev, Lappeenranta-Lahti University of Technology LUT |
|
|
17:00 - 18:30
|
1-9 (RHÔNE 3) - Satoshi Ueno, Ritsumeikan University. Co-Chair: Bastien Tigges, Technical University of Darmstadt |
(+)
|
|
17:00 - 17:30 |
› A Series-Winding Topology Converter for the Magnetic Field Superimposed Magnetic Bearing - Jianfu DING, Huazhong University of Science and Technology |
|
|
17:30 - 18:00 |
› Hybrid passive levitation mechanism utilizing thrust force and magnetic force for a pump application - Wataru Hijikata, Tokyo Institute of Technology [Tokyo] |
|
|
18:00 - 18:30 |
› Magnetic Suspension System Using Persistent Current Flowing in Superconducting Coil - Mochimitsu Komori, Kyushu Institute of Technology |
|
| Time |
Event |
(+)
|
|
09:00 - 10:00
|
Plenary Session III : Active Magnetic Bearings Industry Trends, Challenges and Opportunities (AUDITORIUM PASTEUR) - Richard Jayawant (Product manager for Waukesha Magnetic Bearings) |
|
|
10:00 - 10:20
|
Break - Break |
|
|
10:20 - 12:20
|
S2-1 (RHÔNE 1) - Takeshi Mizuno, Saitama University. Co-Chair: Joachim Van Verdeghem, UCLouvain |
(+)
|
|
10:20 - 10:50 |
› Comparison of Rotor Magnetic Circuit Topologies for Passively Levitated Self-bearing Machines - Adrien Robert, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain |
|
|
10:50 - 11:20 |
› Design & Control of Bearingless drive for Rim Driven Thruster - Wouter Manenschijn, Insumo BV |
|
|
11:20 - 11:50 |
› Influence of Eddy Current in Permanent Magnet Rotor on Suspension Forces and Experimental Verification in Bearingless Motors with Divided Winding - Masahide Ooshima, Suwa University of Science |
|
|
11:50 - 12:20 |
› Proposal of a One-DOF Actively Controlled Bearingless Motor Using Zero-Sequence Current - Yusuke Fujii, Tokyo Institute of Technology [Tokyo] |
|
|
10:20 - 12:20
|
S2-2 (RHÔNE 2) - Bruno Dehez, UCLouvain. Co-Chair Yue Zhang, NUAA |
(+)
|
|
10:20 - 10:50 |
› Design and manufacturing of permanent magnet bearing rings for high speed applications - Tan Tan, Central Institute of Engineering, Electronics and Analytics –Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH |
|
|
10:50 - 11:20 |
› Asymmetries in Planetary Touch-Down Bearings - Benedikt Schüßler, Technical University of Darmstadt - Institute for Mechatronic Systems |
|
|
11:20 - 11:50 |
› Model Order Reduction of an axial magnetic bearing - Jérôme Tomezyk, SKF Magnetic Mechatronics |
|
|
11:50 - 12:20 |
› Modelling and Dynamic Analysis of Rotor-AMBs System with Shrink Fit Assembly - Yang Zhou, Nanjing University of Aeronautics and Astronautics [Nanjing] |
|
|
10:20 - 12:20
|
S2_3 (RHÔNE 3) - Lakdar Sedi-Haddad, SKF S2M. Co_Chair: Domminik Wimmer, TU Wien |
(+)
|
|
10:20 - 10:50 |
› Design of an Active Magnetic Bearing for the Identification of Static and Dynamic Performances of a self-Aligning Hydrodynamic Journal Bearing - Mohamed-Amine Hassini, EDF LAB Division Recherche et Développement |
|
|
10:50 - 11:20 |
› Less Losses in Active Magnetic Bearings - Bert-Uwe Koehler, University of Applied Sciences [Berlin] |
|
|
11:20 - 11:50 |
› Material Testing Device Using Magnetic Levitation Mechanism - Koichi Oka, Kochi University of Technology |
|
|
12:20 - 14:00
|
Lunch (SALON PASTEUR) |
|
|
14:00 - 16:00
|
S2-4 (RHÔNE 1) - Rasish Khatri, Calentix Technologies, Co-Chair: Marius Pakstys, Politecnico di Torino |
(+)
|
|
14:00 - 14:30 |
› Rotor vibration control via active magnetic bearings and internal actuation - Gauthier Fieux, University of Bath |
|
|
14:30 - 15:00 |
› Unbalance Compensation for a 5-DOF Magnetic Rotor-Bearing System - Shuo-Chih Wei, Shuo-Chih Wei |
|
|
15:00 - 15:30 |
› Experimental Results of Unbiased Control of 9-Pole Radial Magnetic Bearing - Myounggyu Noh, Chungnam National University |
|
|
15:30 - 16:00 |
› Flywheel Energy Storage System with Thermal Insulation - Shyh-Leh Chen, National Chung Cheng University |
|
|
14:00 - 16:00
|
S2-5 (RHÔNE 2) - Larry Hawkins, Calnetix Technologies. Co-Chair Yang Zhou, NUAA |
(+)
|
|
14:00 - 14:30 |
› Control and Commissioning of Active Magnetic Bearing (AMB) System for High-speed 1 MW Turbo Blower - Nikita Uzhegov, SpinDrive - Alexander Smirnov, SpinDrive |
|
|
14:30 - 15:00 |
› Data-driven modelling of touch-down bearing forces - Bastian Tigges, Technical University of Darmstadt - Institute for Mechatronic Systems |
|
|
15:00 - 15:30 |
› Large Diameter and Highly Homogenous Homopolar Active Magnetic Bearings for Energy Storage and Aerospace - Phil Swan, The Atlantis Project |
|
|
15:30 - 16:00 |
› Dynamic Response of Magnetically Suspended Rotor under Base Motions - Yue ZHANG, Nanjing University of Aeronautics and Astronautics |
|
|
14:00 - 16:00
|
S2-6 (RHÔNE 3) - Bert-Uwe Koehler (HTW Berlin). Co_Chair: Tan Tan, Central Institute of Engineering |
(+)
|
|
14:00 - 14:30 |
› Velocity Estimation on an Active Suspension for a Translational Electrodynamic Maglev System - Eugenio Tramacere, Department of Mechanical and Aerospace Engineering, Politecnico di Torino - Marius Pakstys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino |
|
|
14:30 - 15:00 |
› Product Carbon Footprint of Cryogenic Turboexpanders Equipped with Active Magnetic Bearings in Hydrocarbon Gas Processing - Louis Mann, Atlas Copco Mafi-Trench Company LLC |
|
|
15:30 - 16:00 |
› Operation Test of Magnetic Bearing by Regenerated Power from High-Speed IPM Motor at Unexpected Power Stop - Yohji Okada, Ibaraki University |
|
|
15:30 - 16:00 |
› Realization of Lateral Flux-path Control Magnetic Suspension Using Rotational Mechanism - Takeshi Mizuno, Saitama University |
|
|
16:00 - 16:30
|
Break - Break |
|
|
16:30 - 18:00
|
Round Table : REinvent AMB Technology - Limitations & Perspectives (AUDITORIUM PASTEUR) - Larry Hawkins Director of Technology: Magnetic Bearings Calnetix Technologies Andrea Masala Product Manager – Bearings Waukesha Magnetic Bearings Lakdar Sadi-Haddad Electrical & Software R&D Manager SKF Magnetic Mechatronics |
|
|
19:30 - 22:30
|
Gala Dinner - Chapelle de la Trinité
30 rue de la Bourse, 69002, Lyon
Metro A - Station Cordeliers |
|
| Time |
Event |
(+)
|
|
09:00 - 10:00
|
Plenary Session IV "Experience in Magnetic Bearings – Lessons Learnt and Expectations" (AUDITORIUM PASTEUR) - Antoine LUCAS & Alain GELIN (TotalEnergies) ; Chair: Richard Jayawant (Waukesha Magnetic Bearings) |
|
|
10:00 - 11:00
|
Plenary Session V "Bearingless motors: the future of magnetically levitated motor systems" (AUDITORIUM PASTEUR) - Wolfgang Gruber (Johannes Kepler University Linz) and Eric Severson (University of Wisconsin ) |
|
|
11:00 - 11:30
|
Break - Break |
|
|
11:30 - 12:20
|
Closing Session (AUDITORIUM PASTEUR) |
|
|
12:30 - 13:00
|
End of the conference (lunch boxes) - End of the conference (lunch boxes) |
|
|
Loading... 
