18th International Symposium on Magnetic Bearings - ISMB18

8:30 - 9:00 (30min)

Opening session

AUDITORIUM PASTEUR

9:00 - 10:00 (1h)

Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons …

AUDITORIUM PASTEUR

Svend Tarald Kibsgaard (Previous Leading Researcher in Magnetic Bearing Supported Machines for Equinor) ; Chair: Bert-Uwe Koehler (HTW Berlin); Co-Chair: Yuanping Xu (NUAA)

https://ismb18.sciencesconf.org/data/program/P1.JPG

10:00 - 10:20 (20min)

Break

10:20 - 12:20 (2h)

1-1

RHÔNE 1

Adam Pilat (AGH University of Science and Technology). Co-Chair: Dave Winterborne, Newcastle University

› Experience with Industrial AMB Development in Zittau Description - Test Rigs – Prototypes – Possibilities - Christian Vanek, Hochschule Zittau/Goerlitz 10:20-10:50 (30min)

› Magnetic Suspension Stability of a Compact Axial Flux Self-Bearing Motor for Implantable Pediatric Rotary Blood Pumps - Osa Masahiro, Ibaraki University 10:50-11:20 (30min)

› Generalized Modal Decoupling Control for Active Magnetic Bearings - Pascal Zeugin, Mecos AG 11:20-11:50 (30min)

› Rotordynamic Design and Control of Three-Stage Centrifugal Compressor with Magnetic Bearings - Sena Jeong, Air Solution R&D Center, LG Electronics 11:50-12:20 (30min)

10:20 - 12:20 (2h)

1-2

RHÔNE 2

Richard Jayawant (Product manager for Waukesha Magnetic Bearings). Co-Chair:Benedikt Schübler, TU Darmstadt - IMS

› 2nd Review of Developments in Bearingless Motors - Hubert Mitterhofer, Linz Center of Mechatronics GmbH [Autriche] 10:20-10:50 (30min)

› Analysis of Force Capacity in Magnetic Bearings and Bearingless Motors from the Perspective of Airgap Space Harmonic Fields - Anvar Khamitov, University of Wisconsin-Madison 10:50-11:20 (30min)

› Applicability of flux switching permanent magnet bearingless motors in present-day and future manufacturing and transportation - Rafal Jastrzebski, Lappeenranta-Lahti University of Technology LUT 11:20-11:50 (30min)

› Bearingless Slice Motors with PM-free Rotor for Disposable Centrifugal Blood Pumps - Tadahiko SHINSHI, Tokyo Institute of Technology 11:50-12:20 (30min)

10:20 - 12:20 (2h)

1-3

RHÔNE 3

Patrick Keogh, Bath University. Co-Chair Laurens Jacobs, KU Leuven

› Comparing Magnetic Bearings with Symmetry of 3 - Afonso Gomes, Programa de Engenharia Elétrica, COPPE Universidade Federal do Rio de Janeiro 10:20-10:50 (30min)

› Linear Superconducting Magnetic Bearing for Urban Transportation - Richard Stephan, Federal University of Rio de Janeiro 10:50-12:20 (1h30)

› The dynamic characteristics of a diamagnetic levitated electrostatic motor - Yuanping XU, Nanjing University of Aeronautics and Astronautics 10:50-11:20 (30min)

› Offshore gas compression challenges to reduce the carbon footprint in a needed transition. - Massimiliano Ortiz Neri, Baker Hughes Nuovo Pignone, - Alexandre Kral, SKF S2M 11:20-11:50 (30min)

12:20 - 14:00 (1h40)

Lunch

SALON PASTEUR

14:00 - 15:00 (1h)

Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux

AUDITORIUM PASTEUR

Yusheng HU (Gree Electric Appliances, lnc. of Zhuhai)

https://ismb18.sciencesconf.org/data/program/P2.JPG

15:00 - 16:30 (1h30)

1-4

RHÔNE 1

Myounggyu D. Noh, Chungnam National University. Co_Chair: Adrien Robert, Uclouvain

› Observer-based Self-Sensing Techniques for Hybrid Active-Passive Self-Bearing Machines - Joachim Van Verdeghem, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain 15:00-15:30 (30min)

› Short-Circuit Fault-Tolerant Strategy for AMB Power Electronic Controller Based on Shared-Bridge Topology - Feng Hu, Huazhong University of Science and Technology 15:30-16:00 (30min)

› Ten-Phase-Nine-Leg Topology for Five-Axis Active Magnetic Bearing Drive - Yixuan Shuai, Yixuan Shuai 16:00-16:30 (30min)

15:00 - 16:30 (1h30)

1-5

RHÔNE 2

Mitterhofer Hubert, Linz Center of Mechatronics. Co-Chair: Guillaume Colinet, UCLouvain

› A Comparison of GaN Transistors to MOSFETs for Active Magnetic Levitation - Alexander Pesch, Youngstown State University 15:00-15:30 (30min)

› Comparative analysis of the Performances and reliability of a Switching Power Amplifier (SPA) for Active Magnetic Bearing Systems: SiC MOSFET Vs Si IGBT Version - André De Andrade, SKF Magnetic Mechatronics 15:30-16:00 (30min)

› Axial Position Control of a Lorentz-Force-Type Cylindrical Self-Bering Motor with Coreless Distributed Windings - Satoshi Ueno, Ritsumeikan University 16:00-16:30 (30min)

15:00 - 16:30 (1h30)

1-6

RHÔNE 3

Wolfgang Gruber, Johannes Kepler University Linz. Co-Chair: Tramacere Eugenio,Politecnico di Torino

› Modeling and Simulation of a Compressor Installed with Active Magnetic Bearings Exploiting Feedforward Control - Marius Pakštys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino 15:00-15:30 (30min)

› Variable Speed Direct Drive Induction Motors Levitated by Active Magnetic Bearings for Oil&Gas Compression Services - Lionel Durantay, General Electric 15:30-16:00 (30min)

› Investigation of magnetic field by the Hall sensors embedded into magnetic bearing poles - ADAM PILAT, AGH University of Science and Technology 16:00-16:30 (30min)

16:30 - 17:00 (30min)

Break

17:00 - 18:30 (1h30)

1-7

RHÔNE 1

Beat Aeschlimann, ZHAW-IMS. Co-Chair Gauthier Fieux, Bath University

› Design of a PCB integrated eddy current sensor with shield feature for radial rotor displacement measurement - Dominik Wimmer, TU Wien, Institute of Energy Systems and Electrical Drives 17:00-17:30 (30min)

› PWM Filter for Active Magnetic Bearings - Larry Hawkins, Calnetix Technologies 17:30-18:00 (30min)

› Limitations of Reluctance Networks to Model the Frequency-Dependent Leakage and Fringing Fluxes in Active Magnetic Thrust Bearings - Robert Seifert, VEM Sachsenwerk GmbH 18:00-18:30 (30min)

17:00 - 18:30 (1h30)

1-8

RHÔNE 2

Andrea Tonoli, Politecnico di Torino. Co-Chair: Anvar Khamitov, University of Wisconsin-Madison

› Practical results of ADRC applied to Radial Position Control of a Bearingless Induction Machine - Jossana Ferreira, Universidade Federal do Rio Grande do Norte [Natal] 17:00-17:30 (30min)

› Tuning Methods for Classical SISO PID Magnetic Levitation Controllers via Analytic Models - Nathan Petersen, University of Wisconsin-Madison 17:30-18:00 (30min)

› Linear parameter-varying H∞ control of bearingless machine - Andrei Zhuravlev, Lappeenranta-Lahti University of Technology LUT 18:00-18:30 (30min)

17:00 - 18:30 (1h30)

1-9

RHÔNE 3

Satoshi Ueno, Ritsumeikan University. Co-Chair: Bastien Tigges, Technical University of Darmstadt

› A Series-Winding Topology Converter for the Magnetic Field Superimposed Magnetic Bearing - Jianfu DING, Huazhong University of Science and Technology 17:00-17:30 (30min)

› Hybrid passive levitation mechanism utilizing thrust force and magnetic force for a pump application - Wataru Hijikata, Tokyo Institute of Technology [Tokyo] 17:30-18:00 (30min)

› Magnetic Suspension System Using Persistent Current Flowing in Superconducting Coil - Mochimitsu Komori, Kyushu Institute of Technology 18:00-18:30 (30min)

Planning