18th International Symposium on Magnetic Bearings - ISMB18

9:00 - 10:00 (1h)

Plenary Session III : Active Magnetic Bearings Industry Trends, Challenges and Opportunities

AUDITORIUM PASTEUR

Richard Jayawant (Product manager for Waukesha Magnetic Bearings)

https://ismb18.sciencesconf.org/data/program/P3.JPG

10:00 - 10:20 (20min)

Break

10:20 - 12:20 (2h)

S2-1

RHÔNE 1

Takeshi Mizuno, Saitama University. Co-Chair: Joachim Van Verdeghem, UCLouvain

› Comparison of Rotor Magnetic Circuit Topologies for Passively Levitated Self-bearing Machines - Adrien Robert, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain 10:20-10:50 (30min)

› Design & Control of Bearingless drive for Rim Driven Thruster - Wouter Manenschijn, Insumo BV 10:50-11:20 (30min)

› Influence of Eddy Current in Permanent Magnet Rotor on Suspension Forces and Experimental Verification in Bearingless Motors with Divided Winding - Masahide Ooshima, Suwa University of Science 11:20-11:50 (30min)

› Proposal of a One-DOF Actively Controlled Bearingless Motor Using Zero-Sequence Current - Yusuke Fujii, Tokyo Institute of Technology [Tokyo] 11:50-12:20 (30min)

10:20 - 12:20 (2h)

S2-2

RHÔNE 2

Bruno Dehez, UCLouvain. Co-Chair Yue Zhang, NUAA

› Design and manufacturing of permanent magnet bearing rings for high speed applications - Tan Tan, Central Institute of Engineering, Electronics and Analytics –Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH 10:20-10:50 (30min)

› Asymmetries in Planetary Touch-Down Bearings - Benedikt Schüßler, Technical University of Darmstadt - Institute for Mechatronic Systems 10:50-11:20 (30min)

› Model Order Reduction of an axial magnetic bearing - Jérôme Tomezyk, SKF Magnetic Mechatronics 11:20-11:50 (30min)

› Modelling and Dynamic Analysis of Rotor-AMBs System with Shrink Fit Assembly - Yang Zhou, Nanjing University of Aeronautics and Astronautics [Nanjing] 11:50-12:20 (30min)

10:20 - 12:20 (2h)

S2_3

RHÔNE 3

Lakdar Sedi-Haddad, SKF S2M. Co_Chair: Domminik Wimmer, TU Wien

› Design of an Active Magnetic Bearing for the Identification of Static and Dynamic Performances of a self-Aligning Hydrodynamic Journal Bearing - Mohamed-Amine Hassini, EDF LAB Division Recherche et Développement 10:20-10:50 (30min)

› Less Losses in Active Magnetic Bearings - Bert-Uwe Koehler, University of Applied Sciences [Berlin] 10:50-11:20 (30min)

› Material Testing Device Using Magnetic Levitation Mechanism - Koichi Oka, Kochi University of Technology 11:20-11:50 (30min)

12:20 - 14:00 (1h40)

Lunch

SALON PASTEUR

14:00 - 16:00 (2h)

S2-4

RHÔNE 1

Rasish Khatri, Calentix Technologies, Co-Chair: Marius Pakstys, Politecnico di Torino

› Rotor vibration control via active magnetic bearings and internal actuation - Gauthier Fieux, University of Bath 14:00-14:30 (30min)

› Unbalance Compensation for a 5-DOF Magnetic Rotor-Bearing System - Shuo-Chih Wei, Shuo-Chih Wei 14:30-15:00 (30min)

› Experimental Results of Unbiased Control of 9-Pole Radial Magnetic Bearing - Myounggyu Noh, Chungnam National University 15:00-15:30 (30min)

› Flywheel Energy Storage System with Thermal Insulation - Shyh-Leh Chen, National Chung Cheng University 15:30-16:00 (30min)

14:00 - 16:00 (2h)

S2-5

RHÔNE 2

Larry Hawkins, Calnetix Technologies. Co-Chair Yang Zhou, NUAA

› Control and Commissioning of Active Magnetic Bearing (AMB) System for High-speed 1 MW Turbo Blower - Nikita Uzhegov, SpinDrive - Alexander Smirnov, SpinDrive 14:00-14:30 (30min)

› Data-driven modelling of touch-down bearing forces - Bastian Tigges, Technical University of Darmstadt - Institute for Mechatronic Systems 14:30-15:00 (30min)

› Large Diameter and Highly Homogenous Homopolar Active Magnetic Bearings for Energy Storage and Aerospace - Phil Swan, The Atlantis Project 15:00-15:30 (30min)

› Dynamic Response of Magnetically Suspended Rotor under Base Motions - Yue ZHANG, Nanjing University of Aeronautics and Astronautics 15:30-16:00 (30min)

14:00 - 16:00 (2h)

S2-6

RHÔNE 3

Bert-Uwe Koehler (HTW Berlin). Co_Chair: Tan Tan, Central Institute of Engineering

› Velocity Estimation on an Active Suspension for a Translational Electrodynamic Maglev System - Eugenio Tramacere, Department of Mechanical and Aerospace Engineering, Politecnico di Torino - Marius Pakstys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino 14:00-14:30 (30min)

› Product Carbon Footprint of Cryogenic Turboexpanders Equipped with Active Magnetic Bearings in Hydrocarbon Gas Processing - Louis Mann, Atlas Copco Mafi-Trench Company LLC 14:30-15:00 (30min)

› Operation Test of Magnetic Bearing by Regenerated Power from High-Speed IPM Motor at Unexpected Power Stop - Yohji Okada, Ibaraki University 15:30-16:00 (30min)

› Realization of Lateral Flux-path Control Magnetic Suspension Using Rotational Mechanism - Takeshi Mizuno, Saitama University 15:30-16:00 (30min)

16:00 - 16:30 (30min)

Break

16:30 - 18:00 (1h30)

Round Table : REinvent AMB Technology - Limitations & Perspectives

AUDITORIUM PASTEUR

Larry Hawkins Director of Technology: Magnetic Bearings Calnetix Technologies Andrea Masala Product Manager – Bearings Waukesha Magnetic Bearings Lakdar Sadi-Haddad Electrical & Software R&D Manager SKF Magnetic Mechatronics

https://ismb18.sciencesconf.org/data/program/ISMB18_RT2.jpg

19:30 - 22:30 (3h)

Gala Dinner

Chapelle de la Trinité 30 rue de la Bourse, 69002, Lyon Metro A - Station Cordeliers

Planning