Tuesday, July 18, 2023
| Time | Event | (+) |
| 19:00 - 20:30 | Welcome reception (SALON PASTEUR) |
Wednesday, July 19, 2023
| Time | Event | (+) |
| 08:30 - 09:00 | Opening session (AUDITORIUM PASTEUR) | |
| 09:00 - 10:00 | Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons … (AUDITORIUM PASTEUR) - Svend Tarald Kibsgaard (Previous Leading Researcher in Magnetic Bearing Supported Machines for Equinor) ; Chair: Bert-Uwe Koehler (HTW Berlin); Co-Chair: Yuanping Xu (NUAA) |
|
| 10:00 - 10:20 | Break - Break | |
| 10:20 - 12:20 | 1-1 (RHÔNE 1) - Adam Pilat (AGH University of Science and Technology). Co-Chair: Dave Winterborne, Newcastle University | (+) |
| 10:20 - 10:50 | › Experience with Industrial AMB Development in Zittau Description - Test Rigs – Prototypes – Possibilities - Christian Vanek, Hochschule Zittau/Goerlitz | |
| 10:50 - 11:20 | › Magnetic Suspension Stability of a Compact Axial Flux Self-Bearing Motor for Implantable Pediatric Rotary Blood Pumps - Osa Masahiro, Ibaraki University | |
| 11:20 - 11:50 | › Generalized Modal Decoupling Control for Active Magnetic Bearings - Pascal Zeugin, Mecos AG | |
| 11:50 - 12:20 | › Rotordynamic Design and Control of Three-Stage Centrifugal Compressor with Magnetic Bearings - Sena Jeong, Air Solution R&D Center, LG Electronics | |
| 10:20 - 12:20 | 1-2 (RHÔNE 2) - Richard Jayawant (Product manager for Waukesha Magnetic Bearings). Co-Chair:Benedikt Schübler, TU Darmstadt - IMS | (+) |
| 10:20 - 10:50 | › 2nd Review of Developments in Bearingless Motors - Hubert Mitterhofer, Linz Center of Mechatronics GmbH [Autriche] | |
| 10:50 - 11:20 | › Analysis of Force Capacity in Magnetic Bearings and Bearingless Motors from the Perspective of Airgap Space Harmonic Fields - Anvar Khamitov, University of Wisconsin-Madison | |
| 11:20 - 11:50 | › Applicability of flux switching permanent magnet bearingless motors in present-day and future manufacturing and transportation - Rafal Jastrzebski, Lappeenranta-Lahti University of Technology LUT | |
| 11:50 - 12:20 | › Bearingless Slice Motors with PM-free Rotor for Disposable Centrifugal Blood Pumps - Tadahiko SHINSHI, Tokyo Institute of Technology | |
| 10:20 - 12:20 | 1-3 (RHÔNE 3) - Patrick Keogh, Bath University. Co-Chair Laurens Jacobs, KU Leuven | (+) |
| 10:20 - 10:50 | › Comparing Magnetic Bearings with Symmetry of 3 - Afonso Gomes, Programa de Engenharia Elétrica, COPPE Universidade Federal do Rio de Janeiro | |
| 10:50 - 12:20 | › Linear Superconducting Magnetic Bearing for Urban Transportation - Richard Stephan, Federal University of Rio de Janeiro | |
| 10:50 - 11:20 | › The dynamic characteristics of a diamagnetic levitated electrostatic motor - Yuanping XU, Nanjing University of Aeronautics and Astronautics | |
| 11:20 - 11:50 | › Offshore gas compression challenges to reduce the carbon footprint in a needed transition. - Massimiliano Ortiz Neri, Baker Hughes Nuovo Pignone, - Alexandre Kral, SKF S2M | |
| 12:20 - 14:00 | Lunch (SALON PASTEUR) | |
| 14:00 - 15:00 | Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux (AUDITORIUM PASTEUR) - Yusheng HU (Gree Electric Appliances, lnc. of Zhuhai) |
|
| 15:00 - 16:30 | 1-4 (RHÔNE 1) - Myounggyu D. Noh, Chungnam National University. Co_Chair: Adrien Robert, Uclouvain | (+) |
| 15:00 - 15:30 | › Observer-based Self-Sensing Techniques for Hybrid Active-Passive Self-Bearing Machines - Joachim Van Verdeghem, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain | |
| 15:30 - 16:00 | › Short-Circuit Fault-Tolerant Strategy for AMB Power Electronic Controller Based on Shared-Bridge Topology - Feng Hu, Huazhong University of Science and Technology | |
| 16:00 - 16:30 | › Ten-Phase-Nine-Leg Topology for Five-Axis Active Magnetic Bearing Drive - Yixuan Shuai, Yixuan Shuai | |
| 15:00 - 16:30 | 1-5 (RHÔNE 2) - Mitterhofer Hubert, Linz Center of Mechatronics. Co-Chair: Guillaume Colinet, UCLouvain | (+) |
| 15:00 - 15:30 | › A Comparison of GaN Transistors to MOSFETs for Active Magnetic Levitation - Alexander Pesch, Youngstown State University | |
| 15:30 - 16:00 | › Comparative analysis of the Performances and reliability of a Switching Power Amplifier (SPA) for Active Magnetic Bearing Systems: SiC MOSFET Vs Si IGBT Version - André De Andrade, SKF Magnetic Mechatronics | |
| 16:00 - 16:30 | › Axial Position Control of a Lorentz-Force-Type Cylindrical Self-Bering Motor with Coreless Distributed Windings - Satoshi Ueno, Ritsumeikan University | |
| 15:00 - 16:30 | 1-6 (RHÔNE 3) - Wolfgang Gruber, Johannes Kepler University Linz. Co-Chair: Tramacere Eugenio,Politecnico di Torino | (+) |
| 15:00 - 15:30 | › Modeling and Simulation of a Compressor Installed with Active Magnetic Bearings Exploiting Feedforward Control - Marius Pakštys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino | |
| 15:30 - 16:00 | › Variable Speed Direct Drive Induction Motors Levitated by Active Magnetic Bearings for Oil&Gas Compression Services - Lionel Durantay, General Electric | |
| 16:00 - 16:30 | › Investigation of magnetic field by the Hall sensors embedded into magnetic bearing poles - ADAM PILAT, AGH University of Science and Technology | |
| 16:30 - 17:00 | Break - Break | |
| 17:00 - 18:30 | 1-7 (RHÔNE 1) - Beat Aeschlimann, ZHAW-IMS. Co-Chair Gauthier Fieux, Bath University | (+) |
| 17:00 - 17:30 | › Design of a PCB integrated eddy current sensor with shield feature for radial rotor displacement measurement - Dominik Wimmer, TU Wien, Institute of Energy Systems and Electrical Drives | |
| 17:30 - 18:00 | › PWM Filter for Active Magnetic Bearings - Larry Hawkins, Calnetix Technologies | |
| 18:00 - 18:30 | › Limitations of Reluctance Networks to Model the Frequency-Dependent Leakage and Fringing Fluxes in Active Magnetic Thrust Bearings - Robert Seifert, VEM Sachsenwerk GmbH | |
| 17:00 - 18:30 | 1-8 (RHÔNE 2) - Andrea Tonoli, Politecnico di Torino. Co-Chair: Anvar Khamitov, University of Wisconsin-Madison | (+) |
| 17:00 - 17:30 | › Practical results of ADRC applied to Radial Position Control of a Bearingless Induction Machine - Jossana Ferreira, Universidade Federal do Rio Grande do Norte [Natal] | |
| 17:30 - 18:00 | › Tuning Methods for Classical SISO PID Magnetic Levitation Controllers via Analytic Models - Nathan Petersen, University of Wisconsin-Madison | |
| 18:00 - 18:30 | › Linear parameter-varying H∞ control of bearingless machine - Andrei Zhuravlev, Lappeenranta-Lahti University of Technology LUT | |
| 17:00 - 18:30 | 1-9 (RHÔNE 3) - Satoshi Ueno, Ritsumeikan University. Co-Chair: Bastien Tigges, Technical University of Darmstadt | (+) |
| 17:00 - 17:30 | › A Series-Winding Topology Converter for the Magnetic Field Superimposed Magnetic Bearing - Jianfu DING, Huazhong University of Science and Technology | |
| 17:30 - 18:00 | › Hybrid passive levitation mechanism utilizing thrust force and magnetic force for a pump application - Wataru Hijikata, Tokyo Institute of Technology [Tokyo] | |
| 18:00 - 18:30 | › Magnetic Suspension System Using Persistent Current Flowing in Superconducting Coil - Mochimitsu Komori, Kyushu Institute of Technology |
Thursday, July 20, 2023
| Time | Event | (+) |
| 09:00 - 10:00 | Plenary Session III : Active Magnetic Bearings Industry Trends, Challenges and Opportunities (AUDITORIUM PASTEUR) - Richard Jayawant (Product manager for Waukesha Magnetic Bearings) |
|
| 10:00 - 10:20 | Break - Break | |
| 10:20 - 12:20 | S2-1 (RHÔNE 1) - Takeshi Mizuno, Saitama University. Co-Chair: Joachim Van Verdeghem, UCLouvain | (+) |
| 10:20 - 10:50 | › Comparison of Rotor Magnetic Circuit Topologies for Passively Levitated Self-bearing Machines - Adrien Robert, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain | |
| 10:50 - 11:20 | › Design & Control of Bearingless drive for Rim Driven Thruster - Wouter Manenschijn, Insumo BV | |
| 11:20 - 11:50 | › Influence of Eddy Current in Permanent Magnet Rotor on Suspension Forces and Experimental Verification in Bearingless Motors with Divided Winding - Masahide Ooshima, Suwa University of Science | |
| 11:50 - 12:20 | › Proposal of a One-DOF Actively Controlled Bearingless Motor Using Zero-Sequence Current - Yusuke Fujii, Tokyo Institute of Technology [Tokyo] | |
| 10:20 - 12:20 | S2-2 (RHÔNE 2) - Bruno Dehez, UCLouvain. Co-Chair Yue Zhang, NUAA | (+) |
| 10:20 - 10:50 | › Design and manufacturing of permanent magnet bearing rings for high speed applications - Tan Tan, Central Institute of Engineering, Electronics and Analytics –Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH | |
| 10:50 - 11:20 | › Asymmetries in Planetary Touch-Down Bearings - Benedikt Schüßler, Technical University of Darmstadt - Institute for Mechatronic Systems | |
| 11:20 - 11:50 | › Model Order Reduction of an axial magnetic bearing - Jérôme Tomezyk, SKF Magnetic Mechatronics | |
| 11:50 - 12:20 | › Modelling and Dynamic Analysis of Rotor-AMBs System with Shrink Fit Assembly - Yang Zhou, Nanjing University of Aeronautics and Astronautics [Nanjing] | |
| 10:20 - 12:20 | S2_3 (RHÔNE 3) - Lakdar Sedi-Haddad, SKF S2M. Co_Chair: Domminik Wimmer, TU Wien | (+) |
| 10:20 - 10:50 | › Design of an Active Magnetic Bearing for the Identification of Static and Dynamic Performances of a self-Aligning Hydrodynamic Journal Bearing - Mohamed-Amine Hassini, EDF LAB Division Recherche et Développement | |
| 10:50 - 11:20 | › Less Losses in Active Magnetic Bearings - Bert-Uwe Koehler, University of Applied Sciences [Berlin] | |
| 11:20 - 11:50 | › Material Testing Device Using Magnetic Levitation Mechanism - Koichi Oka, Kochi University of Technology | |
| 12:20 - 14:00 | Lunch (SALON PASTEUR) | |
| 14:00 - 16:00 | S2-4 (RHÔNE 1) - Rasish Khatri, Calentix Technologies, Co-Chair: Marius Pakstys, Politecnico di Torino | (+) |
| 14:00 - 14:30 | › Rotor vibration control via active magnetic bearings and internal actuation - Gauthier Fieux, University of Bath | |
| 14:30 - 15:00 | › Unbalance Compensation for a 5-DOF Magnetic Rotor-Bearing System - Shuo-Chih Wei, Shuo-Chih Wei | |
| 15:00 - 15:30 | › Experimental Results of Unbiased Control of 9-Pole Radial Magnetic Bearing - Myounggyu Noh, Chungnam National University | |
| 15:30 - 16:00 | › Flywheel Energy Storage System with Thermal Insulation - Shyh-Leh Chen, National Chung Cheng University | |
| 14:00 - 16:00 | S2-5 (RHÔNE 2) - Larry Hawkins, Calnetix Technologies. Co-Chair Yang Zhou, NUAA | (+) |
| 14:00 - 14:30 | › Control and Commissioning of Active Magnetic Bearing (AMB) System for High-speed 1 MW Turbo Blower - Nikita Uzhegov, SpinDrive - Alexander Smirnov, SpinDrive | |
| 14:30 - 15:00 | › Data-driven modelling of touch-down bearing forces - Bastian Tigges, Technical University of Darmstadt - Institute for Mechatronic Systems | |
| 15:00 - 15:30 | › Large Diameter and Highly Homogenous Homopolar Active Magnetic Bearings for Energy Storage and Aerospace - Phil Swan, The Atlantis Project | |
| 15:30 - 16:00 | › Dynamic Response of Magnetically Suspended Rotor under Base Motions - Yue ZHANG, Nanjing University of Aeronautics and Astronautics | |
| 14:00 - 16:00 | S2-6 (RHÔNE 3) - Bert-Uwe Koehler (HTW Berlin). Co_Chair: Tan Tan, Central Institute of Engineering | (+) |
| 14:00 - 14:30 | › Velocity Estimation on an Active Suspension for a Translational Electrodynamic Maglev System - Eugenio Tramacere, Department of Mechanical and Aerospace Engineering, Politecnico di Torino - Marius Pakstys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino | |
| 14:30 - 15:00 | › Product Carbon Footprint of Cryogenic Turboexpanders Equipped with Active Magnetic Bearings in Hydrocarbon Gas Processing - Louis Mann, Atlas Copco Mafi-Trench Company LLC | |
| 15:30 - 16:00 | › Operation Test of Magnetic Bearing by Regenerated Power from High-Speed IPM Motor at Unexpected Power Stop - Yohji Okada, Ibaraki University | |
| 15:30 - 16:00 | › Realization of Lateral Flux-path Control Magnetic Suspension Using Rotational Mechanism - Takeshi Mizuno, Saitama University | |
| 16:00 - 16:30 | Break - Break | |
| 16:30 - 18:00 | Round Table : REinvent AMB Technology - Limitations & Perspectives (AUDITORIUM PASTEUR) - Larry Hawkins Director of Technology: Magnetic Bearings Calnetix Technologies Andrea Masala Product Manager – Bearings Waukesha Magnetic Bearings Lakdar Sadi-Haddad Electrical & Software R&D Manager SKF Magnetic Mechatronics |
|
| 19:30 - 22:30 | Gala Dinner - Chapelle de la Trinité 30 rue de la Bourse, 69002, Lyon Metro A - Station Cordeliers |
Friday, July 21, 2023
| Time | Event | (+) |
| 09:00 - 10:00 | Plenary Session IV "Experience in Magnetic Bearings – Lessons Learnt and Expectations" (AUDITORIUM PASTEUR) - Antoine LUCAS & Alain GELIN (TotalEnergies) ; Chair: Richard Jayawant (Waukesha Magnetic Bearings) |
|
| 10:00 - 11:00 | Plenary Session V "Bearingless motors: the future of magnetically levitated motor systems" (AUDITORIUM PASTEUR) - Wolfgang Gruber (Johannes Kepler University Linz) and Eric Severson (University of Wisconsin ) |
|
| 11:00 - 11:30 | Break - Break | |
| 11:30 - 12:20 | Closing Session (AUDITORIUM PASTEUR) | |
| 12:30 - 13:00 | End of the conference (lunch boxes) - End of the conference (lunch boxes) |
Saturday, July 22, 2023
| Time | Event | (+) |
