18th International Symposium on Magnetic Bearings - ISMB18

8:30 - 9:00 (30min)

Opening session

AUDITORIUM PASTEUR

9:00 - 10:00 (1h)

Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons …

AUDITORIUM PASTEUR

Svend Tarald Kibsgaard (Previous Leading Researcher in Magnetic Bearing Supported Machines for Equinor) ; Chair: Bert-Uwe Koehler (HTW Berlin); Co-Chair: Yuanping Xu (NUAA)

https://ismb18.sciencesconf.org/data/program/P1.JPG

10:00 - 10:20 (20min)

Break

10:20 - 12:20 (2h)

1-1

RHÔNE 1

Adam Pilat (AGH University of Science and Technology). Co-Chair: Dave Winterborne, Newcastle University

› Experience with Industrial AMB Development in Zittau Description - Test Rigs – Prototypes – Possibilities - Christian Vanek, Hochschule Zittau/Goerlitz 10:20-10:50 (30min)

› Magnetic Suspension Stability of a Compact Axial Flux Self-Bearing Motor for Implantable Pediatric Rotary Blood Pumps - Osa Masahiro, Ibaraki University 10:50-11:20 (30min)

› Generalized Modal Decoupling Control for Active Magnetic Bearings - Pascal Zeugin, Mecos AG 11:20-11:50 (30min)

› Rotordynamic Design and Control of Three-Stage Centrifugal Compressor with Magnetic Bearings - Sena Jeong, Air Solution R&D Center, LG Electronics 11:50-12:20 (30min)

10:20 - 12:20 (2h)

1-2

RHÔNE 2

Richard Jayawant (Product manager for Waukesha Magnetic Bearings). Co-Chair:Benedikt Schübler, TU Darmstadt - IMS

› 2nd Review of Developments in Bearingless Motors - Hubert Mitterhofer, Linz Center of Mechatronics GmbH [Autriche] 10:20-10:50 (30min)

› Analysis of Force Capacity in Magnetic Bearings and Bearingless Motors from the Perspective of Airgap Space Harmonic Fields - Anvar Khamitov, University of Wisconsin-Madison 10:50-11:20 (30min)

› Applicability of flux switching permanent magnet bearingless motors in present-day and future manufacturing and transportation - Rafal Jastrzebski, Lappeenranta-Lahti University of Technology LUT 11:20-11:50 (30min)

› Bearingless Slice Motors with PM-free Rotor for Disposable Centrifugal Blood Pumps - Tadahiko SHINSHI, Tokyo Institute of Technology 11:50-12:20 (30min)

10:20 - 12:20 (2h)

1-3

RHÔNE 3

Patrick Keogh, Bath University. Co-Chair Laurens Jacobs, KU Leuven

› Comparing Magnetic Bearings with Symmetry of 3 - Afonso Gomes, Programa de Engenharia Elétrica, COPPE Universidade Federal do Rio de Janeiro 10:20-10:50 (30min)

› Linear Superconducting Magnetic Bearing for Urban Transportation - Richard Stephan, Federal University of Rio de Janeiro 10:50-12:20 (1h30)

› The dynamic characteristics of a diamagnetic levitated electrostatic motor - Yuanping XU, Nanjing University of Aeronautics and Astronautics 10:50-11:20 (30min)

› Offshore gas compression challenges to reduce the carbon footprint in a needed transition. - Massimiliano Ortiz Neri, Baker Hughes Nuovo Pignone, - Alexandre Kral, SKF S2M 11:20-11:50 (30min)

12:20 - 14:00 (1h40)

Lunch

SALON PASTEUR

14:00 - 15:00 (1h)

Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux

AUDITORIUM PASTEUR

Yusheng HU (Gree Electric Appliances, lnc. of Zhuhai)

https://ismb18.sciencesconf.org/data/program/P2.JPG

15:00 - 16:30 (1h30)

1-4

RHÔNE 1

Myounggyu D. Noh, Chungnam National University. Co_Chair: Adrien Robert, Uclouvain

› Observer-based Self-Sensing Techniques for Hybrid Active-Passive Self-Bearing Machines - Joachim Van Verdeghem, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain 15:00-15:30 (30min)

› Short-Circuit Fault-Tolerant Strategy for AMB Power Electronic Controller Based on Shared-Bridge Topology - Feng Hu, Huazhong University of Science and Technology 15:30-16:00 (30min)

› Ten-Phase-Nine-Leg Topology for Five-Axis Active Magnetic Bearing Drive - Yixuan Shuai, Yixuan Shuai 16:00-16:30 (30min)

15:00 - 16:30 (1h30)

1-5

RHÔNE 2

Mitterhofer Hubert, Linz Center of Mechatronics. Co-Chair: Guillaume Colinet, UCLouvain

› A Comparison of GaN Transistors to MOSFETs for Active Magnetic Levitation - Alexander Pesch, Youngstown State University 15:00-15:30 (30min)

› Comparative analysis of the Performances and reliability of a Switching Power Amplifier (SPA) for Active Magnetic Bearing Systems: SiC MOSFET Vs Si IGBT Version - André De Andrade, SKF Magnetic Mechatronics 15:30-16:00 (30min)

› Axial Position Control of a Lorentz-Force-Type Cylindrical Self-Bering Motor with Coreless Distributed Windings - Satoshi Ueno, Ritsumeikan University 16:00-16:30 (30min)

15:00 - 16:30 (1h30)

1-6

RHÔNE 3

Wolfgang Gruber, Johannes Kepler University Linz. Co-Chair: Tramacere Eugenio,Politecnico di Torino

› Modeling and Simulation of a Compressor Installed with Active Magnetic Bearings Exploiting Feedforward Control - Marius Pakštys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino 15:00-15:30 (30min)

› Variable Speed Direct Drive Induction Motors Levitated by Active Magnetic Bearings for Oil&Gas Compression Services - Lionel Durantay, General Electric 15:30-16:00 (30min)

› Investigation of magnetic field by the Hall sensors embedded into magnetic bearing poles - ADAM PILAT, AGH University of Science and Technology 16:00-16:30 (30min)

16:30 - 17:00 (30min)

Break

17:00 - 18:30 (1h30)

1-7

RHÔNE 1

Beat Aeschlimann, ZHAW-IMS. Co-Chair Gauthier Fieux, Bath University

› Design of a PCB integrated eddy current sensor with shield feature for radial rotor displacement measurement - Dominik Wimmer, TU Wien, Institute of Energy Systems and Electrical Drives 17:00-17:30 (30min)

› PWM Filter for Active Magnetic Bearings - Larry Hawkins, Calnetix Technologies 17:30-18:00 (30min)

› Limitations of Reluctance Networks to Model the Frequency-Dependent Leakage and Fringing Fluxes in Active Magnetic Thrust Bearings - Robert Seifert, VEM Sachsenwerk GmbH 18:00-18:30 (30min)

17:00 - 18:30 (1h30)

1-8

RHÔNE 2

Andrea Tonoli, Politecnico di Torino. Co-Chair: Anvar Khamitov, University of Wisconsin-Madison

› Practical results of ADRC applied to Radial Position Control of a Bearingless Induction Machine - Jossana Ferreira, Universidade Federal do Rio Grande do Norte [Natal] 17:00-17:30 (30min)

› Tuning Methods for Classical SISO PID Magnetic Levitation Controllers via Analytic Models - Nathan Petersen, University of Wisconsin-Madison 17:30-18:00 (30min)

› Linear parameter-varying H∞ control of bearingless machine - Andrei Zhuravlev, Lappeenranta-Lahti University of Technology LUT 18:00-18:30 (30min)

17:00 - 18:30 (1h30)

1-9

RHÔNE 3

Satoshi Ueno, Ritsumeikan University. Co-Chair: Bastien Tigges, Technical University of Darmstadt

› A Series-Winding Topology Converter for the Magnetic Field Superimposed Magnetic Bearing - Jianfu DING, Huazhong University of Science and Technology 17:00-17:30 (30min)

› Hybrid passive levitation mechanism utilizing thrust force and magnetic force for a pump application - Wataru Hijikata, Tokyo Institute of Technology [Tokyo] 17:30-18:00 (30min)

› Magnetic Suspension System Using Persistent Current Flowing in Superconducting Coil - Mochimitsu Komori, Kyushu Institute of Technology 18:00-18:30 (30min)

	Tue. 18	Wed. 19	Thu. 20	Fri. 21	Sat. 22
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00	Welcome reception 19:00 - 20:30 (1h30) Welcome reception SALON PASTEUR	Opening session 8:30 - 9:00 (30min) Opening session AUDITORIUM PASTEUR Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons … 9:00 - 10:00 (1h) Plenary Session I : Subsea Compression Station When « Magnetic Levitation » reveals new horizons … AUDITORIUM PASTEUR Svend Tarald Kibsgaard (Previous Leading Researcher in Magnetic Bearing Supported Machines for Equinor) ; Chair: Bert-Uwe Koehler (HTW Berlin); Co-Chair: Yuanping Xu (NUAA) https://ismb18.sciencesconf.org/data/program/P1.JPG Break 10:00 - 10:20 (20min) Break Break 1-1 1-2 1-3 10:20 - 12:20 (2h) 1-1 RHÔNE 1 Adam Pilat (AGH University of Science and Technology). Co-Chair: Dave Winterborne, Newcastle University › Experience with Industrial AMB Development in Zittau Description - Test Rigs – Prototypes – Possibilities - Christian Vanek, Hochschule Zittau/Goerlitz 10:20-10:50 (30min) › Magnetic Suspension Stability of a Compact Axial Flux Self-Bearing Motor for Implantable Pediatric Rotary Blood Pumps - Osa Masahiro, Ibaraki University 10:50-11:20 (30min) › Generalized Modal Decoupling Control for Active Magnetic Bearings - Pascal Zeugin, Mecos AG 11:20-11:50 (30min) › Rotordynamic Design and Control of Three-Stage Centrifugal Compressor with Magnetic Bearings - Sena Jeong, Air Solution R&D Center, LG Electronics 11:50-12:20 (30min) 10:20 - 12:20 (2h) 1-2 RHÔNE 2 Richard Jayawant (Product manager for Waukesha Magnetic Bearings). Co-Chair:Benedikt Schübler, TU Darmstadt - IMS › 2nd Review of Developments in Bearingless Motors - Hubert Mitterhofer, Linz Center of Mechatronics GmbH [Autriche] 10:20-10:50 (30min) › Analysis of Force Capacity in Magnetic Bearings and Bearingless Motors from the Perspective of Airgap Space Harmonic Fields - Anvar Khamitov, University of Wisconsin-Madison 10:50-11:20 (30min) › Applicability of flux switching permanent magnet bearingless motors in present-day and future manufacturing and transportation - Rafal Jastrzebski, Lappeenranta-Lahti University of Technology LUT 11:20-11:50 (30min) › Bearingless Slice Motors with PM-free Rotor for Disposable Centrifugal Blood Pumps - Tadahiko SHINSHI, Tokyo Institute of Technology 11:50-12:20 (30min) 10:20 - 12:20 (2h) 1-3 RHÔNE 3 Patrick Keogh, Bath University. Co-Chair Laurens Jacobs, KU Leuven › Comparing Magnetic Bearings with Symmetry of 3 - Afonso Gomes, Programa de Engenharia Elétrica, COPPE Universidade Federal do Rio de Janeiro 10:20-10:50 (30min) › Linear Superconducting Magnetic Bearing for Urban Transportation - Richard Stephan, Federal University of Rio de Janeiro 10:50-12:20 (1h30) › The dynamic characteristics of a diamagnetic levitated electrostatic motor - Yuanping XU, Nanjing University of Aeronautics and Astronautics 10:50-11:20 (30min) › Offshore gas compression challenges to reduce the carbon footprint in a needed transition. - Massimiliano Ortiz Neri, Baker Hughes Nuovo Pignone, - Alexandre Kral, SKF S2M 11:20-11:50 (30min) Lunch 12:20 - 14:00 (1h40) Lunch SALON PASTEUR Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux 14:00 - 15:00 (1h) Plenary Session II : Key Technology and Industrialization of Magnetic Bearing Compressor for HVAC. Chair: Jin Zhou. Co-Chair: Gauthier Fieux AUDITORIUM PASTEUR Yusheng HU (Gree Electric Appliances, lnc. of Zhuhai) https://ismb18.sciencesconf.org/data/program/P2.JPG 1-4 1-5 1-6 15:00 - 16:30 (1h30) 1-4 RHÔNE 1 Myounggyu D. Noh, Chungnam National University. Co_Chair: Adrien Robert, Uclouvain › Observer-based Self-Sensing Techniques for Hybrid Active-Passive Self-Bearing Machines - Joachim Van Verdeghem, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain 15:00-15:30 (30min) › Short-Circuit Fault-Tolerant Strategy for AMB Power Electronic Controller Based on Shared-Bridge Topology - Feng Hu, Huazhong University of Science and Technology 15:30-16:00 (30min) › Ten-Phase-Nine-Leg Topology for Five-Axis Active Magnetic Bearing Drive - Yixuan Shuai, Yixuan Shuai 16:00-16:30 (30min) 15:00 - 16:30 (1h30) 1-5 RHÔNE 2 Mitterhofer Hubert, Linz Center of Mechatronics. Co-Chair: Guillaume Colinet, UCLouvain › A Comparison of GaN Transistors to MOSFETs for Active Magnetic Levitation - Alexander Pesch, Youngstown State University 15:00-15:30 (30min) › Comparative analysis of the Performances and reliability of a Switching Power Amplifier (SPA) for Active Magnetic Bearing Systems: SiC MOSFET Vs Si IGBT Version - André De Andrade, SKF Magnetic Mechatronics 15:30-16:00 (30min) › Axial Position Control of a Lorentz-Force-Type Cylindrical Self-Bering Motor with Coreless Distributed Windings - Satoshi Ueno, Ritsumeikan University 16:00-16:30 (30min) 15:00 - 16:30 (1h30) 1-6 RHÔNE 3 Wolfgang Gruber, Johannes Kepler University Linz. Co-Chair: Tramacere Eugenio,Politecnico di Torino › Modeling and Simulation of a Compressor Installed with Active Magnetic Bearings Exploiting Feedforward Control - Marius Pakštys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino 15:00-15:30 (30min) › Variable Speed Direct Drive Induction Motors Levitated by Active Magnetic Bearings for Oil&Gas Compression Services - Lionel Durantay, General Electric 15:30-16:00 (30min) › Investigation of magnetic field by the Hall sensors embedded into magnetic bearing poles - ADAM PILAT, AGH University of Science and Technology 16:00-16:30 (30min) Break 16:30 - 17:00 (30min) Break Break 1-7 1-8 1-9 17:00 - 18:30 (1h30) 1-7 RHÔNE 1 Beat Aeschlimann, ZHAW-IMS. Co-Chair Gauthier Fieux, Bath University › Design of a PCB integrated eddy current sensor with shield feature for radial rotor displacement measurement - Dominik Wimmer, TU Wien, Institute of Energy Systems and Electrical Drives 17:00-17:30 (30min) › PWM Filter for Active Magnetic Bearings - Larry Hawkins, Calnetix Technologies 17:30-18:00 (30min) › Limitations of Reluctance Networks to Model the Frequency-Dependent Leakage and Fringing Fluxes in Active Magnetic Thrust Bearings - Robert Seifert, VEM Sachsenwerk GmbH 18:00-18:30 (30min) 17:00 - 18:30 (1h30) 1-8 RHÔNE 2 Andrea Tonoli, Politecnico di Torino. Co-Chair: Anvar Khamitov, University of Wisconsin-Madison › Practical results of ADRC applied to Radial Position Control of a Bearingless Induction Machine - Jossana Ferreira, Universidade Federal do Rio Grande do Norte [Natal] 17:00-17:30 (30min) › Tuning Methods for Classical SISO PID Magnetic Levitation Controllers via Analytic Models - Nathan Petersen, University of Wisconsin-Madison 17:30-18:00 (30min) › Linear parameter-varying H∞ control of bearingless machine - Andrei Zhuravlev, Lappeenranta-Lahti University of Technology LUT 18:00-18:30 (30min) 17:00 - 18:30 (1h30) 1-9 RHÔNE 3 Satoshi Ueno, Ritsumeikan University. Co-Chair: Bastien Tigges, Technical University of Darmstadt › A Series-Winding Topology Converter for the Magnetic Field Superimposed Magnetic Bearing - Jianfu DING, Huazhong University of Science and Technology 17:00-17:30 (30min) › Hybrid passive levitation mechanism utilizing thrust force and magnetic force for a pump application - Wataru Hijikata, Tokyo Institute of Technology [Tokyo] 17:30-18:00 (30min) › Magnetic Suspension System Using Persistent Current Flowing in Superconducting Coil - Mochimitsu Komori, Kyushu Institute of Technology 18:00-18:30 (30min)	Plenary Session III : Active Magnetic Bearings Industry Trends, Challenges and Opportunities 9:00 - 10:00 (1h) Plenary Session III : Active Magnetic Bearings Industry Trends, Challenges and Opportunities AUDITORIUM PASTEUR Richard Jayawant (Product manager for Waukesha Magnetic Bearings) https://ismb18.sciencesconf.org/data/program/P3.JPG Break 10:00 - 10:20 (20min) Break Break S2-1 S2-2 S2_3 10:20 - 12:20 (2h) S2-1 RHÔNE 1 Takeshi Mizuno, Saitama University. Co-Chair: Joachim Van Verdeghem, UCLouvain › Comparison of Rotor Magnetic Circuit Topologies for Passively Levitated Self-bearing Machines - Adrien Robert, Mechatronic, Electrical Energy, and Dynamic System (MEED), UClouvain 10:20-10:50 (30min) › Design & Control of Bearingless drive for Rim Driven Thruster - Wouter Manenschijn, Insumo BV 10:50-11:20 (30min) › Influence of Eddy Current in Permanent Magnet Rotor on Suspension Forces and Experimental Verification in Bearingless Motors with Divided Winding - Masahide Ooshima, Suwa University of Science 11:20-11:50 (30min) › Proposal of a One-DOF Actively Controlled Bearingless Motor Using Zero-Sequence Current - Yusuke Fujii, Tokyo Institute of Technology [Tokyo] 11:50-12:20 (30min) 10:20 - 12:20 (2h) S2-2 RHÔNE 2 Bruno Dehez, UCLouvain. Co-Chair Yue Zhang, NUAA › Design and manufacturing of permanent magnet bearing rings for high speed applications - Tan Tan, Central Institute of Engineering, Electronics and Analytics –Engineering and Technology (ZEA-1), Forschungszentrum Jülich GmbH 10:20-10:50 (30min) › Asymmetries in Planetary Touch-Down Bearings - Benedikt Schüßler, Technical University of Darmstadt - Institute for Mechatronic Systems 10:50-11:20 (30min) › Model Order Reduction of an axial magnetic bearing - Jérôme Tomezyk, SKF Magnetic Mechatronics 11:20-11:50 (30min) › Modelling and Dynamic Analysis of Rotor-AMBs System with Shrink Fit Assembly - Yang Zhou, Nanjing University of Aeronautics and Astronautics [Nanjing] 11:50-12:20 (30min) 10:20 - 12:20 (2h) S2_3 RHÔNE 3 Lakdar Sedi-Haddad, SKF S2M. Co_Chair: Domminik Wimmer, TU Wien › Design of an Active Magnetic Bearing for the Identification of Static and Dynamic Performances of a self-Aligning Hydrodynamic Journal Bearing - Mohamed-Amine Hassini, EDF LAB Division Recherche et Développement 10:20-10:50 (30min) › Less Losses in Active Magnetic Bearings - Bert-Uwe Koehler, University of Applied Sciences [Berlin] 10:50-11:20 (30min) › Material Testing Device Using Magnetic Levitation Mechanism - Koichi Oka, Kochi University of Technology 11:20-11:50 (30min) Lunch 12:20 - 14:00 (1h40) Lunch SALON PASTEUR S2-4 S2-5 S2-6 14:00 - 16:00 (2h) S2-4 RHÔNE 1 Rasish Khatri, Calentix Technologies, Co-Chair: Marius Pakstys, Politecnico di Torino › Rotor vibration control via active magnetic bearings and internal actuation - Gauthier Fieux, University of Bath 14:00-14:30 (30min) › Unbalance Compensation for a 5-DOF Magnetic Rotor-Bearing System - Shuo-Chih Wei, Shuo-Chih Wei 14:30-15:00 (30min) › Experimental Results of Unbiased Control of 9-Pole Radial Magnetic Bearing - Myounggyu Noh, Chungnam National University 15:00-15:30 (30min) › Flywheel Energy Storage System with Thermal Insulation - Shyh-Leh Chen, National Chung Cheng University 15:30-16:00 (30min) 14:00 - 16:00 (2h) S2-5 RHÔNE 2 Larry Hawkins, Calnetix Technologies. Co-Chair Yang Zhou, NUAA › Control and Commissioning of Active Magnetic Bearing (AMB) System for High-speed 1 MW Turbo Blower - Nikita Uzhegov, SpinDrive - Alexander Smirnov, SpinDrive 14:00-14:30 (30min) › Data-driven modelling of touch-down bearing forces - Bastian Tigges, Technical University of Darmstadt - Institute for Mechatronic Systems 14:30-15:00 (30min) › Large Diameter and Highly Homogenous Homopolar Active Magnetic Bearings for Energy Storage and Aerospace - Phil Swan, The Atlantis Project 15:00-15:30 (30min) › Dynamic Response of Magnetically Suspended Rotor under Base Motions - Yue ZHANG, Nanjing University of Aeronautics and Astronautics 15:30-16:00 (30min) 14:00 - 16:00 (2h) S2-6 RHÔNE 3 Bert-Uwe Koehler (HTW Berlin). Co_Chair: Tan Tan, Central Institute of Engineering › Velocity Estimation on an Active Suspension for a Translational Electrodynamic Maglev System - Eugenio Tramacere, Department of Mechanical and Aerospace Engineering, Politecnico di Torino - Marius Pakstys, Department of Mechanical and Aerospace Engineering, Politecnico di Torino 14:00-14:30 (30min) › Product Carbon Footprint of Cryogenic Turboexpanders Equipped with Active Magnetic Bearings in Hydrocarbon Gas Processing - Louis Mann, Atlas Copco Mafi-Trench Company LLC 14:30-15:00 (30min) › Operation Test of Magnetic Bearing by Regenerated Power from High-Speed IPM Motor at Unexpected Power Stop - Yohji Okada, Ibaraki University 15:30-16:00 (30min) › Realization of Lateral Flux-path Control Magnetic Suspension Using Rotational Mechanism - Takeshi Mizuno, Saitama University 15:30-16:00 (30min) Break 16:00 - 16:30 (30min) Break Break Round Table : REinvent AMB Technology - Limitations & Perspectives 16:30 - 18:00 (1h30) Round Table : REinvent AMB Technology - Limitations & Perspectives AUDITORIUM PASTEUR Larry Hawkins Director of Technology: Magnetic Bearings Calnetix Technologies Andrea Masala Product Manager – Bearings Waukesha Magnetic Bearings Lakdar Sadi-Haddad Electrical & Software R&D Manager SKF Magnetic Mechatronics https://ismb18.sciencesconf.org/data/program/ISMB18_RT2.jpg Gala Dinner 19:30 - 22:30 (3h) Gala Dinner Chapelle de la Trinité 30 rue de la Bourse, 69002, Lyon Metro A - Station Cordeliers	Plenary Session IV "Experience in Magnetic Bearings – Lessons Learnt and Expectations" 9:00 - 10:00 (1h) Plenary Session IV "Experience in Magnetic Bearings – Lessons Learnt and Expectations" AUDITORIUM PASTEUR Antoine LUCAS & Alain GELIN (TotalEnergies) ; Chair: Richard Jayawant (Waukesha Magnetic Bearings) https://ismb18.sciencesconf.org/data/program/P4.JPG Plenary Session V "Bearingless motors: the future of magnetically levitated motor systems" 10:00 - 11:00 (1h) Plenary Session V "Bearingless motors: the future of magnetically levitated motor systems" AUDITORIUM PASTEUR Wolfgang Gruber (Johannes Kepler University Linz) and Eric Severson (University of Wisconsin ) https://ismb18.sciencesconf.org/data/program/P5.JPG Break 11:00 - 11:30 (30min) Break Break Closing Session 11:30 - 12:20 (50min) Closing Session AUDITORIUM PASTEUR End of the conference (lunch boxes) 12:30 - 13:00 (30min) End of the conference (lunch boxes) End of the conference (lunch boxes)